The post Hyperion 10″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>A lightbar that’s distinctly yours.
Our Hyperion LED light bars combine outstanding real-world performance and toughness with an aggressive design and extensive customisation options.
Top quality LED chips and reflectors
Starting with the basics, this light bar is constructed with high-performance OSRAM® OSLON SSL 150 LED chips. These premium chips are extremely efficient, supremely robust, resistant to corrosion and have a 150° viewing angle, which is very important in light bar applications where beam width is key. They also have very low thermal resistance, which means they will remain cooler than other LED chips and their performance will not degrade with extended use. The 5700K colour temperature offers balanced, natural lighting for excellent visibility without causing eye strain from glare.
We have matched these chips with expertly engineered, vacuum-metallised polycarbonate reflectors, which allowed us to create a 180 degree overall beam angle. This means not only can you see far into the distance, but are also made aware of close-up hazards such as kangaroos in time to take evasive action.
Robotic manufacturing
The housing and lens are robotically manufactured and assembled, ensuring the light bar is perfectly sealed against dust and water ingress, and we use the highest quality materials to ensure they’ll last for many years even in harsh conditions.
Intelligent design
Because single row light bars are often used in tight spaces such as inside grilles and underneath roof racks, we have engineered our Hyperion light bars to be as thin as possible by minimising wasted space internally. When using the end-mount legs this bar is only 52.1mm high, and when using the under-mount legs it is still only 63.6mm high.
Extensively customisable
Finally, we’ve made sure there is plenty of customisability so you have the freedom to match this light bar to your vehicle and application. We’ve included three pairs of different coloured side inserts in the pack, and have another seven colour options available for separate purchase. Additionally, each light bar can be switched between high and low modes, and you can also switch between orange and white daytime running lights (DRLs). For further protection and customisation, we also offer black, orange and clear covers for purchase.
Powerful, even combination beam. 180º coverage.
Two brightness settings, and a powerful combination beam pattern will give you the spread and reach that you need for any situation.
Drag the slider to see how your forward view changes when you use a Hardkorr Hyperion LED light bar compared to normal high beam headlights.
Two colour DRL lights
Customise the look of your car with orange or white DRLs
Tested Tough
We’ve engineered these lights to be incredibly durable and reliable, and extensively tested them to ensure they will still perform even under extreme duress in real-world Australian conditions. They are certified as compliant with the following standards:
- IP68 & IP69K: Completely resistant to dust ingress (IP6X), can handle submersion in 3m of water for 30 minutes (IPX8) as well as high-pressure, high-temperature water jets (IPX9K)
- UNECE R10 (CISPR25): Will not unduly interfere with radio signals
In addition, our manufacturing facility has been certified in accordance with the following international standards:
- ISO 9001: Ensures quality management systems have been implemented
- ISO 14001: Ensures environmental management systems have been implemented
The Hardkorr guarantee
All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5 year Australian warranty and a 30-day money back guarantee. For terms and conditions click here.
Specifications
| Materials | 6063 aluminium housing UV hardcoated polycarbonate lens Vacuum-metallised aluminium reflectors |
|---|---|
| LED type | OSRAM OSLON® SSL 150 |
| Power | 45W |
| Beam distance | 1 lux @ 300m (high) / 1 lux @ 127m (low) |
| Output (raw) | 3,780 lumens |
| Output (effective) | 2,700 lumens (high) / 488 lumens (low) |
| Peak intensity | 90,000 candela |
| Colour temperature | 5700K |
| DRL colour | Settable orange / white |
| Operating voltage | 10 – 30V DC |
| Current draw (12V) | 3.09A (high) / 0.58A (low) |
| Current draw (24V) | 1.6A (high) / 0.29A (low) |
| DRL power draw | 0.25A @ 12V / 0.14A @ 24V |
| Operating temperature | -30°C to 65°C |
| Weight | 0.8kg |
| Certifications | CE, CISPR25, ISO 7637-2:2004 |
Pack Contents
| 1x | 10" Hyperion LED light bar |
|---|---|
| 1x | Set end-mount legs |
| 1x | Set under-mount legs |
| 1x | Wiring harness |
| 3x pair | Coloured inserts (blue, black, grey) |
Dimensions
The post Hyperion 10″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>The post Hyperion 20″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>A lightbar that’s distinctly yours.
Our Hyperion LED light bars combine outstanding real-world performance and toughness with an aggressive design and extensive customisation options.
Top quality LED chips and reflectors
Starting with the basics, this light bar is constructed with high-performance OSRAM® OSLON SSL 150 LED chips. These premium chips are extremely efficient, supremely robust, resistant to corrosion and have a 150° viewing angle, which is very important in light bar applications where beam width is key. They also have very low thermal resistance, which means they will remain cooler than other LED chips and their performance will not degrade with extended use. The 5700K colour temperature offers balanced, natural lighting for excellent visibility without causing eye strain from glare.
We have matched these chips with expertly engineered, vacuum-metallised polycarbonate reflectors, which allowed us to create a 180 degree overall beam angle. This means not only can you see far into the distance, but are also made aware of close-up hazards such as kangaroos in time to take evasive action.
Robotic manufacturing
The housing and lens are robotically manufactured and assembled, ensuring the light bar is perfectly sealed against dust and water ingress, and we use the highest quality materials to ensure they’ll last for many years even in harsh conditions.
Intelligent design
Because single row light bars are often used in tight spaces such as inside grilles and underneath roof racks, we have engineered our Hyperion light bars to be as thin as possible by minimising wasted space internally. When using the end-mount legs this bar is only 52.1mm high, and when using the under-mount legs it is still only 63.6mm high.
Extensively customisable
Finally, we’ve made sure there is plenty of customisability so you have the freedom to match this light bar to your vehicle and application. We’ve included three pairs of different coloured side inserts in the pack, and have another seven colour options available for separate purchase. Additionally, each light bar can be switched between high and low modes, and you can also switch between orange and white daytime running lights (DRLs). For further protection and customisation, we also offer black, orange and clear covers for purchase.
Powerful, even combination beam. 180º coverage.
Two brightness settings, and a powerful combination beam pattern will give you the spread and reach that you need for any situation.
Drag the slider to see how your forward view changes when you use a Hardkorr Hyperion LED light bar compared to normal high beam headlights.
Two colour DRL lights
Customise the look of your car with orange or white DRLs
Tested Tough
We’ve engineered these lights to be incredibly durable and reliable, and extensively tested them to ensure they will still perform even under extreme duress in real-world Australian conditions. They are certified as compliant with the following standards:
- IP68 & IP69K: Completely resistant to dust ingress (IP6X), can handle submersion in 3m of water for 30 minutes (IPX8) as well as high-pressure, high-temperature water jets (IPX9K)
- UNECE R10 (CISPR25): Will not unduly interfere with radio signals
In addition, our manufacturing facility has been certified in accordance with the following international standards:
- ISO 9001: Ensures quality management systems have been implemented
- ISO 14001: Ensures environmental management systems have been implemented
The Hardkorr guarantee
All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5 year Australian warranty and a 30-day money back guarantee. For terms and conditions click here.
Specifications
| Materials | 6063 aluminium housing UV hardcoated polycarbonate lens Vacuum-metallised aluminium reflectors |
|---|---|
| LED type | OSRAM OSLON® SSL 150 |
| Power | 105W |
| Beam distance | 1 lux @ 492m (high) / 1 lux @ 208m (low) |
| Output (raw) | 8,820 lumens |
| Output (effective) | 6,020 lumens (high) / 1,100 lumens (low) |
| Peak intensity | 242,000 candela |
| Colour temperature | 5700K |
| DRL colour | Settable orange / white |
| Operating voltage | 10 – 30V DC |
| Current draw (12V) | 7.32A (high) / 1.28A (low) |
| Current draw (24V) | 3.66A (high) / 0.66A (low) |
| DRL power draw | 0.61A @ 12V / 0.33A @ 24V |
| Operating temperature | -30°C to 65°C |
| Weight | 1.491kg |
| Certifications | CE, CISPR25, ISO 7637-2:2004 |
Pack Contents
| 1x | 20" Hyperion LED light bar |
|---|---|
| 1x | Set end-mount legs |
| 1x | Set under-mount legs |
| 1x | Wiring harness |
| 3x pair | Coloured inserts (blue, black, grey) |
Dimensions
The post Hyperion 20″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>The post Hyperion 30″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>A lightbar that’s distinctly yours.
Our Hyperion LED light bars combine outstanding real-world performance and toughness with an aggressive design and extensive customisation options.
Top quality LED chips and reflectors
Starting with the basics, this light bar is constructed with high-performance OSRAM® OSLON SSL 150 LED chips. These premium chips are extremely efficient, supremely robust, resistant to corrosion and have a 150° viewing angle, which is very important in light bar applications where beam width is key. They also have very low thermal resistance, which means they will remain cooler than other LED chips and their performance will not degrade with extended use. The 5700K colour temperature offers balanced, natural lighting for excellent visibility without causing eye strain from glare.
We have matched these chips with expertly engineered, vacuum-metallised polycarbonate reflectors, which allowed us to create a 180 degree overall beam angle. This means not only can you see far into the distance, but are also made aware of close-up hazards such as kangaroos in time to take evasive action.
Robotic manufacturing
The housing and lens are robotically manufactured and assembled, ensuring the light bar is perfectly sealed against dust and water ingress, and we use the highest quality materials to ensure they’ll last for many years even in harsh conditions.
Intelligent design
Because single row light bars are often used in tight spaces such as inside grilles and underneath roof racks, we have engineered our Hyperion light bars to be as thin as possible by minimising wasted space internally. When using the end-mount legs this bar is only 52.1mm high, and when using the under-mount legs it is still only 63.6mm high.
Extensively customisable
Finally, we’ve made sure there is plenty of customisability so you have the freedom to match this light bar to your vehicle and application. We’ve included three pairs of different coloured side inserts in the pack, and have another seven colour options available for separate purchase. Additionally, each light bar can be switched between high and low modes, and you can also switch between orange and white daytime running lights (DRLs). For further protection and customisation, we also offer black, orange and clear covers for purchase.
Powerful, even combination beam. 180º coverage.
Two brightness settings, and a powerful combination beam pattern will give you the spread and reach that you need for any situation.
Drag the slider to see how your forward view changes when you use a Hardkorr Hyperion LED light bar compared to normal high beam headlights.
Two colour DRL lights
Customise the look of your car with orange or white DRLs
Tested Tough
We’ve engineered these lights to be incredibly durable and reliable, and extensively tested them to ensure they will still perform even under extreme duress in real-world Australian conditions. They are certified as compliant with the following standards:
- IP68 & IP69K: Completely resistant to dust ingress (IP6X), can handle submersion in 3m of water for 30 minutes (IPX8) as well as high-pressure, high-temperature water jets (IPX9K)
- UNECE R10 (CISPR25): Will not unduly interfere with radio signals
In addition, our manufacturing facility has been certified in accordance with the following international standards:
- ISO 9001: Ensures quality management systems have been implemented
- ISO 14001: Ensures environmental management systems have been implemented
The Hardkorr guarantee
All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5 year Australian warranty and a 30-day money back guarantee. For terms and conditions click here.
Specifications
| Materials | 6063 aluminium housing UV hardcoated polycarbonate lens Vacuum-metallised aluminium reflectors |
|---|---|
| LED type | OSRAM OSLON® SSL 150 |
| Power | 165W |
| Beam distance | 1 lux @ 687m (high) / 1 lux @ 290m (low) |
| Output (raw) | 13,860 lumens |
| Output (effective) | 8,939 lumens (high) / 1,616 lumens (low) |
| Peak intensity | 472,000 candela |
| Colour temperature | 5700K |
| DRL colour | Settable orange / white |
| Operating voltage | 10 – 30V DC |
| Current draw (12V) | 11.1A (high) / 1.9A (low) |
| Current draw (24V) | 5.69A (high) / 1.04A (low) |
| DRL power draw | 0.96A @ 12V / 0.51A @ 24V |
| Operating temperature | -30°C to 65°C |
| Weight | 2.2kg |
| Certifications | CE, CISPR25, ISO 7637-2:2004 |
Pack Contents
| 1x | 30" Hyperion LED light bar |
|---|---|
| 1x | Set end-mount legs |
| 1x | Set under-mount legs |
| 1x | Wiring harness |
| 3x pair | Coloured inserts (blue, black, grey) |
Dimensions
The post Hyperion 30″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>The post Hyperion 40″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>A lightbar that’s distinctly yours.
Our Hyperion LED light bars combine outstanding real-world performance and toughness with an aggressive design and extensive customisation options.
Top quality LED chips and reflectors
Starting with the basics, this light bar is constructed with high-performance OSRAM® OSLON SSL 150 LED chips. These premium chips are extremely efficient, supremely robust, resistant to corrosion and have a 150° viewing angle, which is very important in light bar applications where beam width is key. They also have very low thermal resistance, which means they will remain cooler than other LED chips and their performance will not degrade with extended use. The 5700K colour temperature offers balanced, natural lighting for excellent visibility without causing eye strain from glare.
We have matched these chips with expertly engineered, vacuum-metallised polycarbonate reflectors, which allowed us to create a 180 degree overall beam angle. This means not only can you see far into the distance, but are also made aware of close-up hazards such as kangaroos in time to take evasive action.
Robotic manufacturing
The housing and lens are robotically manufactured and assembled, ensuring the light bar is perfectly sealed against dust and water ingress, and we use the highest quality materials to ensure they’ll last for many years even in harsh conditions.
Intelligent design
Because single row light bars are often used in tight spaces such as inside grilles and underneath roof racks, we have engineered our Hyperion light bars to be as thin as possible by minimising wasted space internally. When using the end-mount legs this bar is only 52.1mm high, and when using the under-mount legs it is still only 63.6mm high.
Extensively customisable
Finally, we’ve made sure there is plenty of customisability so you have the freedom to match this light bar to your vehicle and application. We’ve included three pairs of different coloured side inserts in the pack, and have another seven colour options available for separate purchase. Additionally, each light bar can be switched between high and low modes, and you can also switch between orange and white daytime running lights (DRLs). For further protection and customisation, we also offer black, orange and clear covers for purchase.
Powerful, even combination beam. 180º coverage.
Two brightness settings, and a powerful combination beam pattern will give you the spread and reach that you need for any situation.
Drag the slider to see how your forward view changes when you use a Hardkorr Hyperion LED light bar compared to normal high beam headlights.
Two colour DRL lights
Customise the look of your car with orange or white DRLs
Tested Tough
We’ve engineered these lights to be incredibly durable and reliable, and extensively tested them to ensure they will still perform even under extreme duress in real-world Australian conditions. They are certified as compliant with the following standards:
- IP68 & IP69K: Completely resistant to dust ingress (IP6X), can handle submersion in 3m of water for 30 minutes (IPX8) as well as high-pressure, high-temperature water jets (IPX9K)
- UNECE R10 (CISPR25): Will not unduly interfere with radio signals
In addition, our manufacturing facility has been certified in accordance with the following international standards:
- ISO 9001: Ensures quality management systems have been implemented
- ISO 14001: Ensures environmental management systems have been implemented
The Hardkorr guarantee
All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5 year Australian warranty and a 30-day money back guarantee. For terms and conditions click here.
Specifications
| Materials | 6063 aluminium housing UV hardcoated polycarbonate lens Vacuum-metallised aluminium reflectors |
|---|---|
| LED type | OSRAM OSLON® SSL 150 |
| Power | 210W |
| Beam distance | 1 lux @ 787m (high) / 1 lux @ 373m (low) |
| Output (raw) | 17,640 lumens |
| Output (effective) | 10,802 lumens (high) / 2,379 lumens (low) |
| Peak intensity | 620,000 candela |
| Colour temperature | 5700K |
| DRL colour | Settable orange / white |
| Operating voltage | 10 – 30V DC |
| Current draw (12V) | 15.24A (high) / 2.43A (low) |
| Current draw (24V) | 7.34A (high) / 1.33A (low) |
| DRL power draw | 1.23A @ 12V / 0.65A @ 24V |
| Operating temperature | -30°C to 65°C |
| Weight | 2.72kg |
| Certifications | CE, CISPR25, ISO 7637-2:2004 |
Pack Contents
| 1x | 40" Hyperion LED light bar |
|---|---|
| 1x | Set end-mount legs |
| 1x | Set under-mount legs |
| 1x | Wiring harness |
| 3x pair | Coloured inserts (blue, black, grey) |
Dimensions
The post Hyperion 40″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>The post Hyperion 50″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>A light bar that’s distinctly yours.
Our Hyperion LED light bars combine outstanding real-world performance and toughness with an aggressive design and extensive customisation options.
Top quality LED chips and reflectors
Starting with the basics, this light bar is constructed with high-performance OSRAM® OSLON SSL 150 LED chips. These premium chips are extremely efficient, supremely robust, resistant to corrosion and have a 150° viewing angle, which is very important in light bar applications where beam width is key. They also have very low thermal resistance, which means they will remain cooler than other LED chips and their performance will not degrade with extended use. The 5700K colour temperature offers balanced, natural lighting for excellent visibility without causing eye strain from glare.
We have matched these chips with expertly engineered, vacuum-metallised polycarbonate reflectors, which allowed us to create a 180 degree overall beam angle. This means not only can you see far into the distance, but are also made aware of close-up hazards such as kangaroos in time to take evasive action.
Robotic manufacturing
The housing and lens are robotically manufactured and assembled, ensuring the light bar is perfectly sealed against dust and water ingress, and we use the highest quality materials to ensure they’ll last for many years even in harsh conditions.
Intelligent design
Because single row light bars are often used in tight spaces such as inside grilles and underneath roof racks, we have engineered our Hyperion light bars to be as thin as possible by minimising wasted space internally. When using the end-mount legs this bar is only 52.1mm high, and when using the under-mount legs it is still only 63.6mm high.
Extensively customisable
Finally, we’ve made sure there is plenty of customisability so you have the freedom to match this light bar to your vehicle and application. We’ve included three pairs of different coloured side inserts in the pack, and have another seven colour options available for separate purchase. Additionally, each light bar can be switched between high and low modes, and you can also switch between orange and white daytime running lights (DRLs). For further protection and customisation, we also offer black, orange and clear covers for purchase.
Powerful, even combination beam. 180º coverage.
Two brightness settings, and a powerful combination beam pattern will give you the spread and reach that you need for any situation.
Drag the slider to see how your forward view changes when you use a Hardkorr Hyperion LED light bar compared to normal high beam headlights.
Two colour DRL lights
Customise the look of your car with orange or white DRLs
Tested Tough
We’ve engineered these lights to be incredibly durable and reliable, and extensively tested them to ensure they will still perform even under extreme duress in real-world Australian conditions. They are certified as compliant with the following standards:
- IP68 & IP69K: Completely resistant to dust ingress (IP6X), can handle submersion in 3m of water for 30 minutes (IPX8) as well as high-pressure, high-temperature water jets (IPX9K)
- UNECE R10 (CISPR25): Will not unduly interfere with radio signals
In addition, our manufacturing facility has been certified in accordance with the following international standards:
- ISO 9001: Ensures quality management systems have been implemented
- ISO 14001: Ensures environmental management systems have been implemented
The Hardkorr guarantee
All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5 year Australian warranty and a 30-day money back guarantee. For terms and conditions click here.
Specifications
| Materials | 6063 aluminium housing UV hardcoated polycarbonate lens Vacuum-metallised aluminium reflectors |
|---|---|
| LED type | OSRAM OSLON® SSL 150 |
| Power | 270W |
| Beam distance | 1 lux @ 883m (high) / 1 lux @ 373m (low) |
| Output (raw) | 22,680 lumens |
| Output (effective) | 13,393 lumens (high) / 2,379 lumens (low) |
| Peak intensity | 780,000 candela |
| Colour temperature | 5700K |
| DRL colour | Settable orange / white |
| Operating voltage | 10 – 30V DC |
| Current draw (12V) | 19.50A (high) / 3.50A (low) |
| Current draw (24V) | 9.73A (high) / 1.78A (low) |
| DRL power draw | 1.5A @ 12V / 0.84A @ 24V |
| Operating temperature | -30°C to 65°C |
| Weight | 3.42kg |
| Certifications | CE, CISPR25, ISO 7637-2:2004 |
Pack Contents
| 1x | 50" Hyperion LED light bar |
|---|---|
| 1x | Set end-mount legs |
| 1x | Set under-mount legs |
| 1x | Wiring harness |
| 3x pair | Coloured inserts (blue, black, grey) |
Dimensions
The post Hyperion 50″ Single Row Light Bar appeared first on Hardkorr Australia.
]]>The post XD-GEN3 Series 22″ Single Row LED Light Bar (XDS400-G3) appeared first on Hardkorr Australia.
]]>The legend continues.
The revolutionary GEN3 dual-chip hybrid LED technology we pioneered in our dual row LED light bars now comes standard in our all-new single row light bars.
Our XDS-GEN3 single row bars feature completely redesigned internals and circuitry for even better performance. 10w CREE® chips on each side provide a powerful flood beam, whilst next-generation 3w OSRAM® chips burn a hole in the night forward of the vehicle.
The result is a beautifully even, ultra-wide beam of light with no dark spots or hot spots in a compact, low-profile unit.
They’re also CISPR15 compliant, meaning they have been independently tested to ensure they do not interfere with radio frequencies.
The 22 inch XDS400-G3 packs a powerful punch for its size. It can mount unobtrusively to any bull bar or under a roof rack.
Dual-chip technology.
The secret behind the unique beam pattern of Hardkorr GEN3 single row light bars is in combining the excellent flood capabilities of CREE® LEDs, the outstanding distance performance of OSRAM® LEDs and our own custom-engineered reflectors. The result is second to none!
Powerful, even combination beam.
Our dual-chip hybrid technology produces a light beam that is unparalleled in width and evenness. The output of these light bars fills your entire field of view, ensuring that you can spot hazards that are located in front of the vehicle and off to the sides of the road as well.
[Click the image for full-size diagram]
Drag the slider to see how your forward view changes when you use a Hardkorr XDS400-G3 LED light bar compared to normal high beam headlights.
Genuine parts, precision optics.
Hardkorr’s GEN3 series light bars are made using genuine top-grade OSRAM® and CREE® LED chips sourced from authorised agents, to ensure even light throw, correct colour rendering and long service life. These chips are matched with custom engineered reflectors that are manufactured to nanometre precision, and secured within high-quality aluminium housing which is designed to effectively dissipate heat and protect the sensitive components within.
This attention to detail ensures that every unit we manufacture gives consistent performance, and helps us fulfil our ambition to be the world’s most trusted manufacturer of LED lighting.
The Hardkorr guarantee
All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 5 year Australian warranty and a 30-day money back guarantee.
Specifications
| Materials | 6063 aluminium housing Lexan® polycarbonate lens |
|---|---|
| LED Manufacturer | OSRAM® (spot LEDs) / CREE® (flood LEDs) |
| LED Number | 6 x 3W OSRAM® 6 x 10W CREE® |
| Beam type | GEN3 hybrid flood & spot |
| Beam throw | 1 lux @ 401m |
| Output | 8,400 lumens |
| Ingress Protection | IP68 |
| Dimensions | 555mm (w) x 70mm (d) x 72mm (h w/sliding legs) / 80mm (h w/end-mount legs) |
| Weight | 2.1kg |
| Operating Voltage | 11 – 38v DC |
| Current | 4.4A @ 13.5V / 2.2A @ 24V |
| Colour Temp | 6000K |
| LED Lifespan | 50,000+ hours |
| Certifications | CE, RoHS, C-Tick, CISPR15 |
Pack Contents
| 1x | 84w single-row LED light bar |
|---|---|
| 1x | set of end-mount legs |
| 1x | set of sliding legs |
| 1x | Deutsch plug tail |
Dimensions
The post XD-GEN3 Series 22″ Single Row LED Light Bar (XDS400-G3) appeared first on Hardkorr Australia.
]]>